-Ability to turn the following page, before the previous one lands (shuffle) It is added as Shuffle Control to the master controller. It is also animatable. now its very easy to create a book which pages starts to turn slowly and speeds up gradually until it shuffles very fast.
-Added Material section. You can assign double or single sided materials. It is also possible to assign an image sequence and Book rigger makes every pages diffuse texture the corresponding frame number of that image sequence.
Book Rigger V3 0 Download Hit
Note: This handbook is to be used for gyroplane information only. Disregard any Helicopter information presented. For current Helicopter information refer to FAA-S-8083-21A, Helicopter Flying Handbook.
Highend3d has been one of the world's largest and oldest communities for high end software such as Maya, 3ds max, Softimage, Shake, Nuke and more. We have the largest selection of Maya Mel Scripts and Maya Plugins on the internet. With over millions of downloads serving hundreds of thousands of users from every major studio in the world, you can trust our quality and service.
Duik also includes lots of useful tools, such as camera controls or scripting and expression tools, that are not solely tied to animation but can be really useful for riggers, animators, motion designers and compositors.
Check out lots of videotutorials that will help you learning Blender and 3D graphics/VFX in general. It was funded in 2010 by Oliver Villar, a BFCT (Blender Foundation Certified Trainer), and the author of the book \"Learning Blender: A Hands-On Guide to Creating 3D Animated Characters\".
The Member Portal allows members to access important information about class schedules and time cards. Training Centers have the option to publish their current class schedule. Members can view the schedule and submit a registration request for classes being offered at their Local Training Center, and download a copy of their Training History. Apprentices also have the option to track the classes they must attend to complete the apprenticeship, as well as record and review On-Job-Training hours through this website.
Autodesk provides download and install instructions for individuals and administrators. Your available downloads appear in Autodesk Account. Find your product, select a version, platform, language, and download method. For more information, visit the Autodesk Knowledge Network.
Maya is a professional 3D animation, modeling, simulation, and rendering toolset, designed for creating realistic characters and blockbuster-worthy effects.\nFrom fantastic creatures to sweeping landscapes and explosive battle sequences, top artists, modelers, and animators rely on Maya\u2019s award-winning toolset to bring today\u2019s most-loved animated and live-action films, TV shows, and video games to life.\n"}]},"@type":"Question","name":"Who uses Maya?","acceptedAnswer":["@type":"Answer","text":"Maya is used by 3D modelers, animators, lighting artists, and FX artists across the film, TV, and games industries.\n"],"@type":"Question","name":"Maya vs 3ds Max","acceptedAnswer":["@type":"Answer","text":"Maya and 3ds Max are used by creative studios around the world for animation, modeling, visual effects, and rendering. Learn when to choose Maya and when to choose 3ds Max.\r\n"],"@type":"Question","name":"How do I download Maya?","acceptedAnswer":["@type":"Answer","text":"Autodesk provides download and install instructions for individuals and administrators. Your available downloads appear in Autodesk Account. Find your product, select a version, platform, language, and download method. For more information, visit the Autodesk Knowledge Network.\n"],"@type":"Question","name":"Can I install Maya on multiple computers? ","acceptedAnswer":["@type":"Answer","text":"With a subscription to Maya software, you can install it on up to 3 computers or other devices. However, only the named user can sign in and use that software on a single computer at any given time. Please refer to the\u202fSoftware License Agreement for more information.\n"],"@type":"Question","name":"How do I convert my Maya free trial to a paid subscription? ","acceptedAnswer":["@type":"Answer","text":"Launch your trial software and click Subscribe Now on the trial screen or buy Maya here. When buying your subscription, enter the same email address and password combination you used to sign in to your trial. Learn more about\u202fconverting a trial to a paid subscription.\n"],"@type":"Question","name":"How much does a Maya subscription cost? ","acceptedAnswer":["@type":"Answer","text":"The price of an annual Maya subscription is\u202f\u202fand the price of a monthly Maya subscription is\u202f. The price of a 3-year Maya subscription is\u202f. If you have infrequent users and are interested in a pay-as-you-go option, please visit www.autodesk.com/flex to learn more.\n"]],"@type":"FAQPage","@context":" "} Autodesk Company overview Careers Investor relations Newsroom Diversity and belonging
Autodesk Foundation Sustainability Contact us Students and educators Affiliate program Autodesk Research How to buy
Visit How to Test for instructions for applying for and taking CCO Written and Practical Exams; visit How to Recertify for instructions on recertification. Complete instructions and exam applications are also contained in the Candidate Handbook for each program.
This person may be qualified in a craft or trade and carry an occupational title such as iron worker, electrician, carpenter, millwright, mechanic, laborer, mason, longshoreman, lineman, pipe fitter, boilermaker, and the like. (The persons described in the categories above will be referred to as rigger even though they carry another occupational title.)
NCCCO identified the following job duties for Rigger Level I certification. A Certified Rigger Level I can perform simple, repetitive rigging tasks when the load weight, center of gravity, the rigging, and rigging configuration are provided or known by the rigger through experience or on-the-job training prior to the rigging activities. Specifically, Level I Riggers should be able to demonstrate or have knowledge of how to:
Candidates must pass both Written and Practical Examinations to be certified for a five-year period. The Written and Practical Exams may be taken in either order. Candidates have 12 months from the time they pass their first Written or Practical Exam for each rigger level in which to pass the corresponding (Written or Practical) Exam.
If a candidate has previously certified in another CCO program and subsequently becomes certified as a rigger or holds Rigger Level I certification and adds Level II certification, he/she may request an updated certification card.
These markup elements allow the user to see how the document follows the Document Drafting Handbook that agencies use to create their documents. These can be useful for better understanding how a document is structured but are not part of the published document itself.
The certification provides riggers with a means of demonstrating that they have attained a professional standard in general event rigging practices. It provides employers and venue operators with a benchmark to use when hiring. Upon gaining the award, individuals are issued with a certificate and an NRC ID card.
In place of the procedure in 65.115, an applicant for a senior parachute rigger certificate is entitled to it if he passes a written test on the regulations of this subpart and presents satisfactory documentary evidence that he -
Each certificated parachute rigger must have a seal with an identifying mark prescribed by the Administrator, and a seal press. After packing a parachute he shall seal the pack with his seal in accordance with the manufacturer's recommendation for that type of parachute.
Welcome to the Waikiki Malia by Outrigger. This intimate retreat is the perfect start and end to a day of exploring and sight-seeing. With easy access to Waikiki Beach, as well as numerous shopping and dining options, the Waikiki Malia by Outrigger is the ultimate home base for your next adventure.
Whether you're traveling with a large group or a close family clan, let Waikiki Malia by Outrigger help get you to paradise. We have room-only group packages that can be customized to your needs. Connecting rooms are also available if you need some additional flexibility.
The downloads are free, but there are costs involved in developing and publishing these documents. ESTA is dependent on donations to meet those costs. Please consider making a donation to help keep these documents free. Visit "Support the TSP Now!" to make a donation.
Entertainment Technology--Construction and Use of Wire Rope Ladders ANSI E1.1 - 2018 describes the construction and use of wire rope ladders in the entertainment industry. It is a revision of the 2012 standard, which was a revision of the 2006 standard with changed load ratings to accommodate heavier workers. Wire rope ladders are distinguished from other ladders by having flexible rails. They are used in applications where ladders with rigid rails are impractical to use, or where a rigid ladder would pose a greater danger to the user or other workers in the area. Rigging September 27, 2018 2018-09-27 100.000 ANSI E1.1 - 2012Entertainment Technology - Construction and Use of Wire Rope Ladders This edition has been superseded. Rigging June 19, 2012 2012-06-19 100.700 ANSI E1.1 - 2006Entertainment Technology - Construction and Use of Wire Rope Ladders This document has been superseded. Rigging August 16, 2006 2006-08-16 100.800 ANSI E1.1 - 1999Entertainment Technology - Construction and Use of Wire Rope Ladders This document has been superseded. Rigging September 16, 1999 1999-09-16 100.900 ANSI E1.2 - 2021Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers ANSI E1.2 describes the design, manufacture, and use of aluminum trusses, towers, and associated aluminum structural components, such as head blocks, sleeve blocks, bases, and corner blocks, used in the entertainment industry in portable structures. Rigging May 06, 2021 2021-05-06 200.000 ANSI E1.2 - 2012Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers This document has been superseded Rigging January 15, 2013 2013-01-15 200.997 ANSI E1.2 - 2006Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers This document has been superseded. Rigging July 13, 2006 2006-07-13 200.998 ANSI E1.2 - 2000Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers This document has been superseded. Rigging August 02, 2000 2000-08-02 200.999 ANSI E1.3 - 2001 (R2021)Entertainment Technology -- Lighting Control Systems - 0 to 10 V Analog Control Specification This standard, which supersedes the prior R2016 version, describes a method of controlling equipment by means of an analog control voltage with the controller being the current source. It is primarily intended for lighting control equipment (controllers and dimmers) although any equipment which might be controlled by a lighting controller (automated luminaires, strobe lights, fog machines, etc.) could use this control method. Control Protocols May 20, 2021 2021-05-20 300.000 ANSI E1.3 - 2001 (R2016)Entertainment Technology - Lighting Control Systems - 0 to 10 V Analog Control Specification This document has been superseded Control Protocols February 17, 2016 2016-02-17 300.996 ANSI E1.3 - 2001 (R2011)Entertainment Technology - Lighting Control Systems - 0 to 10V Analog Control Specification This document has been superseded. Control Protocols June 28, 2011 2011-06-28 300.997 ANSI E1.3 - 2001 (R2006)Entertainment Technology - Lighting Control Systems - 0 to 10V Analog Control Specification This document has been superseded. Control Protocols October 13, 2006 2006-10-13 300.998 ANSI E1.3 - 2001Entertainment Technology - Lighting Control Systems - 0 to 10V Analog Control Specification This document has been superseded. Control Protocols March 21, 2001 2001-03-21 300.999 ANSI E1.4-1 - 2022Entertainment Technology - Manual Counterweight Rigging Systems ANSI E1.4-1 - 2022 is a revision of the previous 2016 version. It applies to permanently installed, manually operated counterweight systems of stage rigging hardware for the raising, lowering, and suspension of scenery, lighting, and similar loads. The standard has been updated to reflect current technology, and no longer includes or recommends wire-guided systems for new installations. Rigging October 27, 2022 2022-10-27 410.000 ANSI E1.4-1 - 2016Entertainment Technology - Manual Counterweight Rigging Systems This document has been superseded by ANSI E1.4-1 - 2022 Rigging October 11, 2016 2016-10-11 410.997 ANSI E1.4 - 2014Entertainment Technology - Manual Counterweight Rigging Systems This document has been superseded by ANSI E1.4-1. Rigging January 24, 2014 2014-01-24 410.998 ANSI E1.4 - 2009Entertainment Technology - Manual Counterweight Rigging Systems This document has been superseded. Rigging April 21, 2009 2009-04-21 410.999 ANSI E1.4-2 - 2021Entertainment Technology - Statically Suspended Rigging Systems ANSI E1.4-2 addresses statically suspended rigging systems permanently installed in performances spaces, places of assembly, and other areas used for entertainment purposes, where not covered by other ANSI Entertainment Technology standards. This standard establishes minimum performance criteria, recommendations and guidelines that can be used for installation, use, maintenance and inspection purposes. Rigging May 06, 2021 2021-05-06 412.000 ANSI E1.4-3 - 2020Entertainment Technology - Manually Operated Hoist Rigging Systems This standard is the third in a set of revisions and partitions of ANSI E1.4-2014. It applies to permanently installed, manually operated hoists used as part of rigging systems for raising, lowering, and suspension of scenery, properties, lighting, and similar loads. This standard establishes requirements for the design, manufacture, installation, inspection, and maintenance of manually operated hoist systems for lifting and suspension of loads for performance, presentation, and theatrical production. Rigging June 02, 2020 2020-06-02 413.000 ANSI ES1.4-2021Event Safety - Event Fire Safety Requirements This standard applies to fire safety in the live event industry. Fire safety is the identification and assessment of event-specific fire risks, and the effects that fire and smoke will have to the life safety of all persons who may be affected. It includes those measures required to minimize the likelihood of a fire starting, means of escape (egress), fire safety monitoring, and the methods used to limit the development, spread, and effects of fire.This standard does not address (a) requirements related to certifying fire fighters and their associated training; (b) requirements related to the construction of firefighting equipment; (c) requirements related to the construction, use, and maintenance of motorized fire fighting apparatus; (d) technical requirements of any equipment used for communications, illumination, signs or other hardware; or (e) installation of fixed fire alarm and suppression systems. Event Safety October 08, 2021 2021-10-08 420.000 ANSI E1.5 - 2009 (R2018)Entertainment Technology - Theatrical Fog Made With Aqueous Solutions of Di- And Trihydric Alcohols This standard describes the composition of theatrical fogs or artificial mists that are not likely to be harmful to otherwise healthy performers, technicians, or audience members of normal working age. This standard is intended to be applied in theatres, arenas, and other places of entertainment or public assembly where theatrical fogs and mists are often used. It lists what is permissible in the fog or haze and how much can be there on a short-term and long-term basis. Fog & Smoke November 29, 2018 2018-11-29 500.000 ANSI E1.5 - 2009 (R2014)Entertainment Technology - Theatrical Fog Made With Aqueous Solutions of Di- And Trihydric Alcohols This document has been superseded. Fog & Smoke June 09, 2014 2014-06-09 500.997 ANSI E1.5 - 2009Entertainment Technology - Theatrical Fog Made with Aqueous Solutions of Di- and Trihydric Alcohols This document has been superseded. Fog & Smoke September 14, 2009 2009-09-14 500.998 ANSI E1.5 - 2003Entertainment Technology - Theatrical Fog Made With Aqueous Solutions of Di- And Trihydric Alcohols This document has been superseded. Fog & Smoke May 12, 2003 2003-05-12 500.999 ANSI E1.6-1 - 2021Entertainment Technology -- Powered Hoist Systems This standard, a limited revision of the previous version, establishes requirements for the design, manufacture, installation, inspection, and maintenance of powered hoist systems for lifting and suspension of loads for performance, presentation, and theatrical production. It does not apply to the structure to which the hoist is attached, to attachment of loads to the load carrying device, or to systems for flying people. Excluded are welded link chain hoists, and manually powered hoists, including auxiliary drill operation. Rigging January 26, 2021 2021-01-26 601.000 ANSI E1.6-1 - 2019Entertainment Technology - Powered Hoist Systems This document has been superseded. Rigging May 10, 2019 2019-05-10 601.800 ANSI E1.6-1 - 2012Entertainment Technology - Powered Hoist Systems This document has been superseded. Rigging October 16, 2012 2012-10-16 601.900 ANSI E1.6-2 - 2020Entertainment Technology - Design, Inspection, & Maintenance of Electric Chain Hoists for the Entertainment Industry ANSI E1.6-2 - 2020 is part of the E1.6 powered entertainment rigging suite of standards. It covers the design, inspection, and maintenance of serially manufactured electric link chain hoists used in the entertainment industry. This standard does not cover attachment to the load or to the overhead structure. Controls used for multiple hoist operation are excluded from the scope of this part of the standard. Rigging August 14, 2020 2020-08-14 602.000 ANSI E1.6-2 - 2018Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry This document has been superseded. Rigging April 10, 2018 2018-04-10 602.900 ANSI E1.6-2 - 2013Design, Inspection, and Maintenance of Electric Chain Hoists for the Entertainment Industry This document has been superseded. Rigging July 10, 2013 2013-07-10 602.999 ANSI E1.6-3 - 2019Selection and Use of Serially Manufactured Chain Hoists in the Entertainment Industry This standard, a revision of the 2012 version, establishes minimum safety requirements for the selection and use of serially manufactured electric link-chain hoists in the entertainment industry. This standard is intended to reduce injury and provide for the protection of life, limb and property. This standard does not address the design or maintenance of these hoists. Rigging October 14, 2019 2019-10-14 603.000 ANSI E1.6-3 - 2012Selection and Use of Chain Hoists in the Entertainment Industry This document has been superseded. Rigging July 03, 2012 2012-07-03 603.900 ANSI E1.6-4 - 2022Design, Inspection and Maintenance of Portable Fixed Speed Electric Chain Hoist Control Systems in the Entertainment Industry This standard is a revision of ANSI E1.6-4-2013, splitting its scope into two different scopes for ease of future use and applicability. It establishes the minimum requirements for the design, inspection, and maintenance of Portable Fixed-Speed Electric Chain Hoist Control Systems in the Entertainment Industry. Other elements connected to Portable Chain Hoist Controllers such as the chain hoist, the electrical power system, the rigging, and the rigged load may be covered by other standards or codes of practice, and may also be required to be inspected by, or reviewed by, a local authority having jurisdiction. This standard is focused on control systems that are based on discrete signals that have a direct effect on the controlling relays, contactors, and indicators, without the aid of a Programmable Electronic System (PES). It is a companion document to ANSI E1.6-5 - 2022 Rigging October 31, 2022 2022-10-31 604.000 ANSI E1.6-4 - 2013Portable Control of Fixed-Speed Electric Chain Hoists in the Entertainment Industry This document has been superseded Rigging October 03, 2013 2013-10-03 604.900 ANSI E1.6-5 - 2022Selection and Use of Portable Fixed Speed Electric Chain Hoist Control Systems in the Entertainment Industry This standard establishes the minimum requirements for the selection and use of Portable Control of Fixed-Speed Electric Chain Hoists in the Entertainment Industry. Other elements connected to Portable Chain Hoist Controllers such as the chain hoist, the electrical power system, the rigging, and the rigged load may be covered by other standards or codes of practice, and may also be required to be inspected by, or reviewed by, a local authority having jurisdiction. This standard is focused on control systems that are based on discrete signals that have a direct effect on the controlling relays, contactors, and indicators, without the aid of a Programmable Electronic System (PES). It is a companion document to ANSI E1.6-4 - 2022 Rigging October 31, 2022 2022-10-31 605.000 ANSI ES1.7 - 2021Event Safety - Weather Preparedness The scope of this standard covers the consideration, development and use of event planning strategies that mitigate weather-related risks associated with live events, and with their associated temporary special event structures. Its scope includes both indoor and outdoor events, because each have considerations for the event participants. Its scope includes only public-access events, and private events where jurisdictional permits are required. This document is one part of a larger collection of standards relating to special event safety. Event Safety March 08, 2021 2021-03-08 710.000 ANSI E1.8-2018Entertainment Technology -- Loudspeaker Enclosures Intended for Overhead Suspension -- Classification, Manufacture and Structural Testing This standard covers the requirements for loudspeaker enclosures specifically intended for overhead suspension, but addresses only the structural characteristics of the enclosure pertaining to its suspension, such as enclosure construction, component part security, enclosure suspension hardware, manufacturing control systems, structural testing, and product representation. Rigging November 29, 2018 2018-11-29 800.000 ANSI E1.8 - 2012Entertainment Technology - Loudspeaker Enclosures Intended for Overhead Suspension--Classification, Manufacture and Structural Testing This document has been superseded. Rigging January 15, 2013 2013-01-15 800.990 ANSI E1.8 - 2005Entertainment Technology - Loudspeaker Enclosures Intended for Overhead Suspension--Classification, Manufacture and Structural Testing This document has been superseded. Rigging November 03, 2005 2005-11-03 800.999 ANSI E1.9 - 2007 (R2017)Reporting Photometric Performance Data for Luminaires Used in Entertainment This standard defines the minimum photometric data to be presented on documents purporting to accurately describe the photometric performance of stage and studio luminaires used in the live entertainment and performance industries. The R2017 edition is a reaffirmation of the 2007 edition. Photometrics November 02, 2017 2017-11-02 900.000 ANSI E1.9 - 2007 (R2012)Reporting Photometric Performance Data for Luminaires Used in Entertainment Lighting This document has been superseded. Photometrics October 15, 2012 2012-10-15 900.997 ANSI E1.9 - 2007Entertainment Technology - Reporting Photometric Performance Data for Luminaires Used in Entertainment Lighting This document has been superseded. Photometrics March 07, 2007 2007-03-07 900.998 ANSI E1.9 - 2001Reporting Photometric Performance Data for Luminaires Used in Entertainment Lighting This document has been superseded. Photometrics March 21, 2001 2001-03-21 900.999 ANSI ES1.9 - 2020Event Safety - Crowd Management The scope of this standard is to define "crowd management" as distinguished from "crowd control", to provide an overview of crowd management theory and vocabulary, and to apply these terms to certain reasonably foreseeable risks that arise during live events. The standard is intended both to identify minimum requirements and provide questions and suggestions that help event organizers make reasonable choices under the circumstances of their event. Event Safety July 06, 2020 2020-07-06 910.000 ANSI E1.11 - 2008 (R2018)Entertainment Technology -- USITT DMX512-A, Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories ANSI E1.11 - 2008 (R2018) is a reaffirmation of the 2008 edition. ANSI E1.11 describes a method of digital data transmission for control of lighting equipment and accessories, including dimmers, color-changers, and related equipment. It intended to provide for interoperability at communication and mechanical levels with controllers and controlled equipment made by different manufacturers. It is an update and expansion of the protocol developed by the United States Institute for Theatre Technology, Inc. and published as "DMX512/1990, Digital Data Transmission Standards for Dimmers and Controllers." Control Protocols May 31, 2018 2018-05-31 1100.000 ANSI E1.11 - 2008 (R2013)Entertainment Technology - USITT DMX512-A, Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories This document has been superseded. Control Protocols March 13, 2013 2013-03-13 1100.997 ANSI E1.11 - 2008Entertainment Technology - USITT DMX512-A, Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories This document has been superseded. Control Protocols December 04, 2008 2008-12-04 1100.998 ANSI E1.11 - 2004Entertainment Technology - USITT DMX512-A - Asynchronous Serial Digital Data Transmission Standard for Controlling Lighting Equipment and Accessories This document has been superseded. Control Protocols November 08, 2004 2004-11-08 1100.999 ANSI E1.14 - 2018Entertainment Technology - Recommendations for Fog Equipment Manuals ANSI E1.14 applies to the user-instruction materials for fog-making equipment manufactured for use in the entertainment industry. In order to use fog safely and effectively, the user must have some general knowledge of the technology, have a clear understanding of how to operate the fog making system, and be aware of the potential hazards related to the use of fog, and particularly the system that he is using. This standard is designed to establish guidelines for manufacturers to provide to the user the necessary information required for the safe and responsible use of fog equipment. Fog & Smoke February 27, 2018 2018-02-27 1400.000 ANSI E1.14 - 2001 (R2013)Entertainment Technology - Recommendations for Inclusions in Fog Equipment Manuals This document has been superseded. Fog & Smoke March 13, 2013 2013-03-13 1400.997 ANSI E1.14 - 2001 (R2007)Entertainment Technology - Recommendations for Inclusions in Fog Equipment Manuals This document has been superseded. Fog & Smoke March 07, 2007 2007-03-07 1400.998 ANSI E1.14 - 2001Entertainment Technology - Recommendations for Inclusions in Fog Equipment Manuals This document has been superseded. Fog & Smoke May 08, 2001 2001-05-08 1400.999 ANSI E1.15 - 2006 (R2021)Entertainment Technology - Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies ANSI E1.15 - 2006 (R2021) is a reaffirmation of the 2006 standard. It gives advice on boom and base assemblies, simple ground-support devices for lighting equipment and accessories. If the assembly is tall, not plumb, loaded unevenly, or likely to get run into by stage wagons or performers, there is substantial risk. This document offers advice to lower or eliminate that risk. Rigging March 08, 2021 2021-03-08 1500.000 ANSI E1.15 - 2006 (R2016)Entertainment Technology - Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies This document has been superseded. Rigging September 23, 2016 2016-09-23 1500.997 ANSI E1.15 - 2006 (R2011)Entertainment Technology - Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies This document has been superseded. Rigging December 06, 2011 2011-12-06 1500.998 ANSI E1.15 - 2006Entertainment Technology - Recommended Practices and Guidelines for the Assembly and Use of Theatrical Boom & Base Assemblies This document has been superseded. Rigging March 31, 2006 2006-03-31 1500.999 ANSI E1.16 - 2002 (R2021)Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables ANSI E1.16 - 2002 (R2021), Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables, describes a standard practice for grounding contact assignment for detachable power cables on 6 kW, 12 kW and 18 kW metal-halide lamp ballasts used in the motion picture and television industries on portable studio luminaires that use a common, three-contact, circular connector. Electrical Power October 28, 2021 2021-10-28 1600.000 ANSI E1.16 - 2002 (R2017)Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables This document has been superseded. Electrical Power May 18, 2017 2017-05-18 1600.600 ANSI E1.16 - 2002 (R2012)Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables This document has been superseded. Electrical Power October 15, 2012 2012-10-15 1600.700 ANSI E1.16 - 2002 (R2007)Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables This document has been superseded. Electrical Power November 06, 2007 2007-11-06 1600.898 ANSI E1.16 - 2002Entertainment Technology - Configuration Standard for Metal Halide Ballast Power Cables This document has been superseded. Electrical Power August 08, 2002 2002-08-08 1600.999 ANSI E1.17 - 2015 (R2020)Entertainment Technology -- Architecture for Control Networks ANSI E1.17 is a suite of documents that specifies an architecture, including protocols and language, which may be configured and combined with other standard protocols to form flexible, networked audio, lighting, or other control systems. It can be implemented on networks that support UDP, IP, and related protocols. It is not bound to Ethernet as a transport medium, but Ethernet is an obvious choice. ACN is being distributed via download as a ZIPped archive of PDFs and a folder of related ACNbase-behaviors files as DDL and HTML. Control Protocols March 23, 2020 2020-03-23 1700.000 ANSI E1.17 - 2015Entertainment Technology - Architecture for Control Networks (ACN) This edition has been superseded. Control Protocols May 21, 2015 2015-05-21 1700.997 ANSI E1.17 - 2010Entertainment Technology - Architecture for Control Networks (ACN) This document has been superseded. Control Protocols January 06, 2011 2011-01-06 1700.998 ANSI E1.17 - 2006Entertainment Technology - Architecture for Control Networks This document has been superseded. Control Protocols October 19, 2006 2006-10-19 1700.999 ANSI ES1.18 - 2022Event Safety - Rigging This standard provides minimum requirements and general guidelines to assist an event organizer or producer regarding the suspension of equipment and materials that are used in the technical production of organized events. It addresses the general requirements for design, planning, installation, set-up, removal, and operation of rigging activities. These activities may be conducted either indoors or outdoors, on structures either temporary or permanent in nature.It does not address permanent rigging systems, nor rigging of people, of performer flying systems, or of the methods and construction of flying scenic elements. Event Safety December 20, 2022 2022-12-20 1801.000 ANSI E1.19 - 2021 Recommended Practice for the Use of Class A Ground-Fault Circuit Interrupters (GFCIs) Intended for Personnel Protection in the Entertainment Industry ANSI E1.19 offers guidance, in accordance with existing applicable standards, on how to select, install, use, and maintain ground fault protection devices in the entertainment industry to protect persons from shock and persons and property from fire. Electrical Power October 15, 2021 2021-10-15 1900.000 ANSI E1.19 - 2015Recommended Practice for the Use of Class A Ground-Fault Circuit Interrupters (GFCIs) Intended for Personnel Protection in the Entertainment Industry This document has been superseded. Electrical Power February 11, 2015 2015-02-11 1900.980 ANSI E1.19 - 2009Recommended Practice for the Use of Class A Ground-Fault Circuit Interrupters (GFCIs) Intended for Personnel Protection in the Entertainment Industry This document has been superseded. Electrical Power May 15, 2009 2009-05-15 1900.999 ANSI ES1.19 - 2020Event Safety - Safety Requirements for Special Event Structures This standard is an update of the 2018 version, correcting errata, and expanding on existing requirements. It covers any temporary structure used for special events ("temporary special event structures"), where such structures are used for presentation, performance, structural support of entertainment technology equipment, audience seating or viewing in conjunction with the event, and regardless if the event is indoor or outdoor. The scope of this standard covers any such structure not otherwise addressed by existing standards, codes or legislation, and to the extent that such other standards, codes or legislation do not already address conditional use of those temporary structures within existing structures. Event Safety June 02, 2020 2020-06-02 1901.000 ANSI ES1.19 - 2018Safety Requirements for Special Event Structures This document has been superseded Event Safety November 06, 2018 2018-11-06 1901.999 E1.20 - 2010Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks E1.20 - 2010, Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks, describes a method of bi-directional communications over a USITT DMX512/1990 or ANSI E1.11 - 2004 data link between an entertainment lighting controller and one or more remotely controlled lighting devices. The protocol was written to work with the ANSI E1.11-2004 control standard, but will work equally well with the current 2009 version of E1.11. It allows discovery of devices on a DMX512/E1.11 network and the remote setting of DMX starting addresses, as well as status and fault reporting back to the control console.E1.20 - 2010 is currently being revised. The 2010 edition is now over-age as an ANS. When that revision process is completed, it will be submitted for re-recognition as an American National Standard. Control Protocols January 04, 2011 2011-01-04 2000.000 ANSI E1.20 - 2006Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks This document has been superseded. Control Protocols March 31, 2006 2006-03-31 2000.999 ANSI E1.21 - 2020Entertainment Technology -- Temporary Structures Used for Technical Production of Outdoor Entertainment Events ANSI E1.21 covers temporary structures used for the technical production of outdoor entertainment events. Custom temporary structures supporting performance platforms are included in the scope of this document, but pre-engineered, manufactured, modular staging systems used as platforms for performance, independent of other temporary structures, are not within its scope. This document helps to ensure the structural reliability and safety of these structures, by setting required levels of design and performance parameters, and establishes a reasonable standard for care for their design and use. Rigging March 23, 2020 2020-03-23 2100.000 ANSI E1.21-2013Entertainment Technology - Temporary Structures Used for Technical Production of Outdoor Entertainment Events This document has been superseded. Rigging December 19, 2013 2013-12-19 2100.899 ANSI E1.21 - 2006Temporary Ground-Supported Overhead Structures Used To Cover Stage Areas and Support Equipment in the Production of Outdoor Entertainment Events This document has been superseded. Rigging May 22, 2006 2006-05-22 2100.999 ANSI E1.22 - 2022Entertainment Technology -- Fire Safety Curtain Systems ANSI E1.22 - 2022, governs the design, materials, fabrication, installation, operation, testing, and maintenance of fire safety curtain systems used for proscenium opening protection in theatres. Rigging April 25, 2022 2022-04-25 2200.000 ANSI E1.22 - 2016Entertainment Technology - Fire Safety Curtain Systems This document has been superseded. Rigging October 11, 2016 2016-10-11 2200.800 ANSI E1.22 - 2009Entertainment Technology - Fire Safety Curtain Systems This document has been superseded. Rigging April 21, 2009 2009-04-21 2200.900 ANSI E1.23 - 2020Entertainment Technology -- Design, Execution, and Maintenance of Atmospheric Effects ANSI E1.23 offers advice on the planning, execution, and maintenance of theatrical effects using glycol, glycerin, or white mineral oil fogs or mists, in theatres, arenas, motion picture studios, and other places of public assembly or motion picture production. The guidance is offered to help effects designers and technicians create effects that can be executed repeatedly and reliably, and so that they can avoid excessive exposure to the fog materials and other foreseeable hazards. New in this edition is guidance on developing strategies to maintain an effect over the months or years of a long-running show or an extended motion-picture shoot. Fog & Smoke April 01, 2020 2020-04-01 2300.000 ANSI E1.23 - 2010 (R2015)Entertainment Technology - Design and Execution of Theatrical Fog Effects This edition has been superseded. Fog & Smoke February 13, 2015 2015-02-13 2300.997 ANSI E1.23 - 2010Entertainment Technology - Design and Execution of Theatrical Fog Effects This document has been superseded. Fog & Smoke September 20, 2010 2010-09-20 2300.998 ANSI E1.23 - 2006Entertainment Technology - Design and Execution of Theatrical Fog Effects This document has been superseded. Fog & Smoke July 13, 2006 2006-07-13 2300.999 ANSI E1.24 - 2012 (R2021)Entertainment Technology - Dimensional Requirements for Stage Pin Connectors ANSI E1.24 is a configuration standard giving the mating requirements for male and female pin connectors, contact set-backs from the front face, and marking requirements. The electrical reliability and flammability requirements for pin connectors are outside the scope of this standard and would be covered by other standards, such as UL 498, Attachment Plugs and Receptacles.The download is a ZIP file of the standard bundled with the CAD files that were used to create the illustrations in the standard. The standard is the standard; the CAD files are simply included as a convenience for those creating connector shop drawings and are not the standard. Electrical Power October 28, 2021 2021-10-28 2400.000 ANSI E1.24 - 2012 (R2017)Entertainment Technology - Dimensional Requirements for Stage Pin Connectors This document has been superseded. Electrical Power February 23, 2017 2017-02-23 2400.800 ANSI E1.24 - 2012Entertainment Technology - Dimensional Requirements for Stage Pin Connectors This document has been superseded. For the CAD files associated with this standard, please download the latest version, ANSI E1.24 - 2012 (R2017). Electrical Power January 10, 2012 2012-01-10 2400.998 ANSI E1.24 - 2006Entertainment Technology - Dimensional Requirements for Stage Pin Connectors This document has been superseded. Electrical Power April 06, 2006 2006-04-06 2400.999 ANSI E1.25 -- 2012 (R2017)Recommended Basic Conditions for Measuring the Photometric Output of Stage and Studio Luminaires by Measuring Illumination Levels Produced on a Planar Surface This document describes the basic conditions for measuring the photometric output of a stage or studio luminaire by testing methods that measure the illumination levels produced by the luminaire on a planar surface. These testing methods include, but are not limited to, measurements taken by digital cameras or hand-held meters. This standard is not intended to give guidance on testing conditions for testing methods that use goniophotometers. The R2017 edition is a reaffirmation of the 2012 edition. Photometrics November 02, 2017 2017-11-02 2500.000 ANSI E1.25 - 2012Recommended Basic Conditions for Measuring the Photometric Output of Stage and Studio Luminaires by Measuring Illumination Levels Produced on a Planar Surface This document has been superseded. Photometrics October 15, 2012 2012-10-15 2500.998 ANSI E1.25 - 2006Entertainment Technology - Recommended Basic Conditions for Measuring the Photometric Output of Stage and Studio Luminaires by Measuring Illumination Levels Produced on a Planar Surface This document has been superseded. Photometrics September 08, 2006 2006-09-08 2500.999 ANSI E1.26 - 2006 (R2022)Entertainment Technology - Recommended Testing Methods and Values for Shock Absorption of Floors Used in Live Performance Venues ANSI E1.26 - 2006 (R2022), Entertainment Technology - Recommended Testing Methods and Values for Shock Absorption of Floors Used in Live Performance Venues, describes a method for measuring the stiffness of a performance floor. It suggests, but does not mandate, some ranges that have been found to be acceptable--neither too stiff nor too springy. Floors May 05, 2022 2022-05-05 2600.000 ANSI E1.26 - 2006 (R2017)Entertainment Technology - Recommended Testing Methods and Values for Shock Absorption of Floors Used in Live Performance Venues This document has been superseded. Floors February 23, 2017 2017-02-23 2600.800 ANSI E1.26 - 2006 (R2012)Entertainment Technology - Recommended Testing Methods and Values for Shock Absorption of Floors Used in Live Performance Venues This document has been superseded. Floors January 13, 2012 2012-01-13 2600.999 ANSI E1.27-1 - 2006 (R2021)Entertainment Technology - Standard for Portable Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products This is a reaffirmation of the prior version. No substantive changes have been made. Control Protocols May 20, 2021 2021-05-20 2701.000 ANSI E1.27-1 - 2006 (R2016)Entertainment Technology-Standard for Portable Control Cables for Use with USITT DMX512/1990 and E1.11 (DMX512-A) Products This document has been superseded Control Protocols April 08, 2016 2016-04-08 2701.997 ANSI E1.27-1 - 2006 (R2011)Entertainment Technology-Standard for Portable Control Cables for Use with USITT DMX512/1990 and E1.11 (DMX512-A) Products This document has been superseded. Control Protocols June 28, 2011 2011-06-28 2701.998 ANSI E1.27-1 - 2006Entertainment Technology-Standard for Portable Control Cables for Use with USITT DMX512/1990 and E1.11 (DMX512-A) Products This document has been superseded. Control Protocols June 06, 2006 2006-06-06 2701.999 ANSI E1.27-2 - 2009 (R2019)Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products E1.27-2 covers cables permanently installed to carry control messages conforming to ANSI E1.11 and USITT DMX512. Control Protocols September 09, 2019 2019-09-09 2702.000 ANSI E1.27-2 - 2009 (R2014)Entertainment Technology - Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products This document has been superseded. Control Protocols June 09, 2014 2014-06-09 2702.998 ANSI E1.27-2 - 2009Entertainment Technology - Recommended Practice for Permanently Installed Control Cables for Use with ANSI E1.11 (DMX512-A) and USITT DMX512/1990 Products This document has been superseded. Control Protocols September 14, 2009 2009-09-14 2702.999 ANSI E1.28 - 2022Guidance on planning followspot positions in places of public assembly ANSI E1.28 offers guidance on the planning of permanent followspot positions, including recommendations on the locations of the followspot positions within the venue, the power likely to be needed, the waste heat generated, the amount of space likely to be needed, and the fall protection and egress issues to be considered for the followspot operator's safety. It has been updated to include information about position apertures and substrates, such as glass and plastics. Followspot Position January 05, 2023 2023-01-05 2800.000 ANSI E1.28 - 2011 (R2021)Guidance on planning followspot positions in places of public assembly This document has been superseded. Followspot Position May 05, 2021 2021-05-05 2800.997 ANSI E1.28 - 2011 (R2016)Guidance on planning followspot positions in places of public assembly This document has been superseded. Followspot Position July 01, 2016 2016-07-01 2800.998 ANSI E1.28 - 2011Guidance on planning followspot positions in places of public assembly This document has been superseded. Followspot Position July 12, 2011 2011-07-12 2800.999 ANSI E1.29 - 2009 (R2018)Product Safety Standard for Theatrical Fog Generators That Create Aerosols of Water, Aqueous Solutions of Glycol or Glycerin, or Highly Refined Alkane Mineral Oil ANSI E1.29 is a guide for product safety testing laboratories in evaluating fog-making equipment for design or construction defects that might create unacceptable hazards. It is based on ANSI/UL 998 - 2006, Humidifiers, but has modifications to deal with safety issues peculiar to fog generators. Fog generators often are evaluated as heating appliances to assure they are not a fire or shock hazard. ANSI E1.29 considers those issues, but also has safety tests for the fog generated. Fog & Smoke November 06, 2018 2018-11-06 2900.000 ANSI E1.29 - 2009 (R2014)Product Safety Standard for Theatrical Fog Generators that Create Aerosols of Water, Aqueous Solutions of Glycol or Glycerin, or Aerosols of Highly Refined Alkane Mineral Oil This document has been superseded. Fog & Smoke June 09, 2014 2014-06-09 2900.998 ANSI E1.29 - 2009Product Safety Standard for Theatrical Fog Generators that Create Aerosols of Water, Aqueous Solutions of Glycol or Glycerin, or Aerosols of Highly Refined Alkane Mineral Oil This document has been superseded. Fog & Smoke September 14, 2009 2009-09-14 2900.999 ANSI E1.30-1 - 2010 (R2021)EPI 23. Device Identification Subdevice This EPI specifies a collection of properties which may be exposed by a DMP device to provide detailed information on the manufacturer, model, serial number, hardware and software revisions and other administrative details of the device. These properties are described in a standard format as a templated DDL (sub)device. Control Protocols May 20, 2021 2021-05-20 3001.000 ANSI E1.30-1 - 2010 (R2016)EPI 23, Device Identification Subdevice This document has been superseded Control Protocols February 17, 2016 2016-02-17 3001.998 ANSI E1.30-1 - 2010EPI 23, Device Identification Subdevice This document has been superseded. Control Protocols January 06, 2011 2011-01-06 3001.999 ANSI E1.30-3 - 2009 (R2019)EPI 25 Time Reference in ACN Systems Using SNTP and NTP ANSI E1.30-3, EPI 25, Time Reference in ACN Systems Using SNTP and NTP, is another recipe in the E1.30 cookbook for ACN. It offers ways of providing a time reference so that events can be synchronized. Control Protocols September 09, 2019 2019-09-09 3003.000 ANSI E1.30-3 - 2009 (R2014)EPI 25, Time Reference in ACN Systems Using SNTP and NTP This document has been superseded. Control Protocols June 09, 2014 2014-06-09 3003.998 ANSI E1.30-3 - 2009EPI 25, Time Reference in ACN Systems Using SNTP and NTP This document has been superseded. Control Protocols September 14, 2009 2009-09-14 3003.999 ANSI E1.30-4 - 2010 (R2021)EPI 26. Device Description Language (DDL) Extensions for DMX512 and E1.31 Devices This EPI defines protocol specific extensions to Device Description Language for describing DMX512 devices. It is a reaffirmation of the 2010 version. Control Protocols May 27, 2021 2021-05-27 3004.000 ANSI E1.30-4 - 2010 (R2015)EPI 26. Device Description Language (DDL) Extensions for DMX512 and E1.31 Devices This document has been superseded. Control Protocols September 25, 2015 2015-09-25 3004.998 ANSI E1.30-4 - 2010EPI 26. Device Description Language (DDL) Extensions for DMX512 and E1.31 Devices This document has been superseded. Control Protocols September 20, 2010 2010-09-20 3004.999 ANSI E1.30-7 - 2009EPI 29, Allocation of Internet Protocol Version 4 Addresses to ACN Hosts This document has been withdrawn and is no longer an American National Standard. Original scope: E1.30-7 -- 2009, EPI 29, Allocation of Internet Protocol Version 4 Addresses to ACN Hosts, is a recipe that changes some of the rules for ACN so that devices with IP addresses not set by DHCP can be used on a network. Device Host Configuration Protocol (DHCP) is a very convenient way to assign IP addresses on a network, but there are cases when IP addresses have to be assigned a different way, perhaps manually. This EPI suggests how. Control Protocols September 14, 2009 2009-09-14 3007.000 ANSI E1.30-10 - 2009 (R2019)EPI 32 Identification of Draft Device Description Language Modules ANSI E1.30-10, EPI 32, is a recommended way of identifying a Device Description Language Module for ACN as a trial version, one under development, not for release yet. ANSI E1.30-10 is part of an open series of E1.30 documents that suggests ways of doing common tasks with ANSI E1.17, Architecture for Control Networks. Control Protocols September 09, 2019 2019-09-09 3010.000 ANSI E1.30-10 - 2009 (R2014)EPI 32, Identification of Draft Device Description Language Modules This document has been superseded. Control Protocols June 09, 2014 2014-06-09 3010.998 ANSI E1.30-10 - 2009EPI 32, Identification of Draft Device Description Language Modules This document has been superseded. Control Protocols May 04, 2009 2009-05-04 3010.999 ANSI E1.30-11 - 2019EPI 33. ACN Root Layer Protocol Operation on TCP ANSI E1.30-11 - 2019 (EPI 33) specifies the operation and formats for the ACN Root Layer Protocol [Arch] operating on [TCP]. Control Protocols May 21, 2019 2019-05-21 3011.000 ANSI E1.31 - 2018Entertainment Technology - Lightweight streaming protocol for transport of DMX512 using ACN ANSI E1.31 - 2018, Entertainment Technology - Lightweight streaming protocol for transport of DMX512 using ACN, is a revision of the 2016 standard. It describes a mechanism to transfer DMX512A packets over a TCP/IP network using a subset of the ACN protocol suite. It covers data format, data protocol, data addressing, and network management It also outlines a synchronization method to help ensure that multiple sinks can process this data concurrently when supervised by the same controller. This revision includes support for IPv6 as well as IPv4. Control Protocols November 07, 2018 2018-11-07 3100.000 ANSI E1.31 - 2016Entertainment Technology - Lightweight streaming protocol for transport of DMX512 using ACN This document has been superseded. Control Protocols October 11, 2016 2016-10-11 3100.998 ANSI E1.31 - 2009Entertainment Technology - Lightweight streaming protocol for transport of DMX512 using ACN This document has been superseded. Control Protocols May 04, 2009 2009-05-04 3100.999 ANSI E1.32-2012 (R2022)Guide for the Inspection of Entertainment Industry Incandescent Lamp Luminaires This document is a reaffirmation of ANSI E1.32-2012. It provides guidance in the inspection of luminaires used in the entertainment industry that use incandescent lamps, with the exception of automated luminaires. This inspection guide is intended to aid those who wish to create a luminaire inspection program and to assist a technician in identifying defects that may be hazardous to life or health and defects that may impair the appearance and/or functioning of the luminaire. Electrical Power August 11, 2022 2022-08-11 3200.000 ANSI E1.32 - 2012 (R2017)Guide for the Inspection of Entertainment Industry Incandescent Lamp Luminaires The document has been superseded Electrical Power September 15, 2017 2017-09-15 3200.998 ANSI E1.32 - 2012Guide for the Inspection of Entertainment Industry Incandescent Lamp Luminaires This document has been superseded. Electrical Power July 03, 2012 2012-07-03 3200.999 ANSI E1.33 - 2019Entertainment Technology -- (RDMnet) -- Message Transport and Device Management of ANSI E1.20 (RDM) compatible and similar devices over IP Networks ANSI E1.33 - 2019, Entertainment Technology -- (RDMnet) -- Message Transport and Device Management of ANSI E1.20 (RDM) compatible and similar devices over IP Networks, is a standard for implementing ANSI E1.20 Remote Device Management messaging over an IP-based network. It is offered here bundled in a ZIP file with an index (ReadMe-RDM_Document_Index) listing other standards with RDM Parameter Messages that work with ANSI E1.33, and with those referenced standards, current as of 3 September 2019. Control Protocols August 27, 2019 2019-08-27 3300.000 ANSI E1.34 - 2009 (R2019)Entertainment Technology - Measuring and Specifying the Slipperiness of Floors Used in Live Performance Venues ANSI E1.34 describes a very simple drag-sled for measuring the slipperiness of a performance floor, and two procedures to use with the sled. One uses standardized stainless steel feet on the sled to give a coefficent of friction number that can be used to describe the floor in a general way. The second procedure measures the slipperiness with a performer's shoe sole materials. ANSI E1.34 is intended for performance floors; it is not intended for measuring the slipperiness of normal walking surfaces, such as hallways and sidewalks. Floors March 08, 2019 2019-03-08 3400.000 ANSI E1.34 - 2009 (R2014)Entertainment Technology - Measuring and Specifying the Slipperiness of Floors Used in Live Performance Venues This edition has been superseded. Floors May 29, 2014 2014-05-29 3400.998 ANSI E1.34 - 2009Entertainment Technology - Measuring and Specifying the Slipperiness of Floors Used in Live Performance Venues This document has been superseded. Floors February 02, 2009 2009-02-02 3400.999 ANSI E1.35 - 2013 (R2022)Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use ANSI E1.35 describes a method for measuring stage and studio luminaire lens quality with particular emphasis on contrast and perceived projected image quality (sharpness). It also offers a way for presenting these results on a datasheet in a format that is readily understood by a typical end-user and that allows the end-user to directly compare lenses in a meaningful way. Without this standard, there is no way to describe how clearly a stage lighting instrument projects an image, other than by showing a person with the actual instrument and gobo. The download is a ZIP file that includes an EPS graphic file of the test pattern in three common gobo sizes. Photometrics October 20, 2022 2022-10-20 3500.000 ANSI E1.35 - 2013 (R2018)Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use This edition has been superseded. Photometrics February 27, 2018 2018-02-27 3500.980 ANSI E1.35 - 2013Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use This document has been superseded. Photometrics May 06, 2013 2013-05-06 3500.998 ANSI E1.35 - 2007Standard for Lens Quality Measurements for Pattern Projecting Luminaires Intended for Entertainment Use This document has been superseded. Photometrics October 10, 2007 2007-10-10 3500.999 ANSI E1.36 - 2007 (R2022)Model Procedure for Permitting the Use of Tungsten-Halogen Incandescent Lamps and Stage and Studio Luminaires in Vendor Exhibit Booths in Convention and Trade Show Exhibition Halls This document has been written to offer a model set of procedures that can be used by convention center and trade show exhibition hall staff to mitigate the risks perceived to be associated with the use of tungsten-halogen lamps and stage and studio luminaires. This policy applies to all luminaires that use tungsten-halogen lamps and to all stage and studio luminaires being used by vendors to provide illumination or to create effects with light in exhibit booths at convention centers or trade shows. Photometrics May 02, 2022 2022-05-02 3600.000 ANSI E1.36 - 2007 (R2017)Model Procedure for Permitting the Use of Tungsten-Halogen Incandescent Lamps and Stage and Studio Luminaires in Vendor Exhibit Booths in Convention and Trade Show Exhibition Halls This document has been superseded. Photometrics November 02, 2017 2017-11-02 3600.700 ANSI E1.36 - 2007 (R2012)Model Procedure for Permitting the Use of Tungsten-Halogen Incandescent Lamps and Stage and Studio Luminaires in Vendor Exhibit Booths in Convention and Trade Show Exhibition Halls This document has been superseded. Photometrics October 04, 2012 2012-10-04 3600.800 ANSI E1.36 - 2007Model Procedure for Permitting the Use of Tungsten-Halogen Incandescent Lamps and Stage and Studio Luminaires in Vendor Exhibit Booths in Convention and Trade Show Exhibition Halls This document has been superseded. Photometrics October 10, 2007 2007-10-10 3600.999 ANSI E1.37-1 - 2012 (R2022)Additional Message Sets for ANSI E1.20 (RDM) -- Part 1, Dimmer Message Sets ANSI E1.37-1 - 2012 (R2022), Additional Message Sets for ANSI E1.20 (RDM) -- Part 1, is part of the E1.37 project, and provides additional get/set parameter messages (PIDs). Most of the messages in this document are intended for use with entertainment lighting dimming systems. These additional messages allow access to configuration parameters commonly found in many theatrical dimming systems. Control Protocols November 21, 2022 2022-11-21 3701.000 ANSI E1.37-1 - 2012 (R2017)Additional Message Sets for ANSI E1.20 (RDM) -- Part 1 This document has been superseded Control Protocols May 18, 2017 2017-05-18 3701.800 ANSI E1.37-1 - 2012Additional Message Sets for ANSI E1.20 (RDM) -- Part 1, Dimmer Message Sets This document has been superseded. Control Protocols January 13, 2012 2012-01-13 3701.900 ANSI E1.37-2 -- 2015 (R2021)Entertainment Technology - Additional Message Sets for ANSI E1.20 (RDM) -- Part 2, IPv4 & DNS Configuration Messages ANSI E1.37-2 is another part of the multi-part, open-ended E1.37 standard. It provides additional Get/Set parameter messages (PIDs) for use with the ANSI E1.20 Remote Device Management protocol. Messages in this document are intended for configuring network interfaces, routing information and Domain Name System settings on devices with IPv4 addresses. Control Protocols June 24, 2021 2021-06-24 3702.000 ANSI E1.37-2 - 2015Entertainment Technology - Additional Message Sets for ANSI E1.20 (RDM) -- Part 2, IPv4 & DNS Configuration Messages This document has been superseded. Control Protocols September 25, 2015 2015-09-25 3702.900 ANSI E1.37-2 - 2014Entertainment Technology - Additional Message Sets for ANSI E1.20 (RDM) -- Part 2, IPv4 & DNS Configuration Messages This document has been superseded. Control Protocols October 10, 2014 2014-10-10 3702.999 ANSI E1.37-7 - 2019Additional Message Sets for ANSI E1.20 (RDM) - Gateway & Splitter Configuration Messages ANSI E1.37-7 provides additional Get/Set Parameter Messages for use with the ANSI E1.20 Remote Device Management protocol [RDM] and ANSI E1.33 RDMnet protocol [RDMnet].It contains messages relating to configuring managed splitters, proxy devices, and RDMnet Devices. Control Protocols May 23, 2019 2019-05-23 3707.000 ANSI E1.39 - 2021Entertainment Technology - Selection and Use of Personal Fall Arrest Systems on Portable Structures Used in the Entertainment Industry ANSI E1.39 establishes minimum requirements for the selection and use of personal fall arrest systems (PFAS) on portable structures in the entertainment industry. In addition, the standard establishes minimum requirements for products and portable structures used in the service of PFAS. The requirements for other methods used to protect workers from fall hazards such as safety nets, guard rails, and rope access techniques are not included in this standard. This standard does not preclude the use of other appropriate standards to promote fall protection safety. Rigging May 06, 2021 2021-05-06 3900.000 ANSI E1.39 - 2015Entertainment Technology - Selection and Use of Personal Fall Arrest Systems on Portable Structures Used in the Entertainment Industry This document has been superseded Rigging January 28, 2015 2015-01-28 3900.999 ANSI E1.40 - 2016 (R2021)Recommendations For the Planning of Theatrical Dust Effects ANSI E1.40 - 2016 (R2021), Recommendations For the Planning of Theatrical Dust Effects, gives a mixture of guidance "should" statements and mandatory "shall" statements to help people to avoid inappropriate dust effect materials, to select those that are least likely to cause health or safety problems, and to use them with care. Fog & Smoke September 09, 2021 2021-09-09 4000.000 ANSI E1.40 - 2016Recommendations For the Planning of Theatrical Dust Effects This document has been superseded. Fog & Smoke September 16, 2016 2016-09-16 4000.998 ANSI E1.40 - 2011Recommendations For the Planning of Theatrical Dust Effects This document has been superseded. Fog & Smoke December 05, 2011 2011-12-05 4000.999 ANSI E1.41 - 2016Recommendations for Measuring and Reporting Photometric Performance Data for Entertainment Luminaires Utilizing Solid State Light Sources ANSI E1.41 - 2016, Recommendations for Measuring and Reporting Photometric Performance Data for Entertainment Luminaires Utilizing Solid State Light Sources, offers recommendations for measuring and reporting the output of LED luminaires used in the live entertainment industry. This industry needs unusually precise color and color rendering characterization, which this document provides. Current methods for luminaire output measurement assume the use of broad-band emitters, which LEDs are not, and do not deal well with characterizing the intensely colored light LEDs can produce. The standard specifies that the Fidelity Index (Rf) rating, as defined in IES TM-30-15, IES Method for Evaluating Light Source Color Rendition, be used for reporting the production of white light of a reported CCT. The previous version, published in 2012, required reporting the CQS score. Photometrics September 16, 2016 2016-09-16 4100.000 ANSI E1.41 - 2012Recommendations for Measuring and Reporting Photometric Performance Data for Entertainment Luminaires Utilizing Solid State Light Sources This document has been superseded. Photometrics February 16, 2012 2012-02-16 4100.999 ANSI E1.42 - 2018Entertainment Technology -- Design, Installation, and Use of Orchestra Pit Lifts This standard covers the design, construction, operation, inspection, testing, maintenance, alteration and repair of permanently installed orchestra pit lifts and their associated parts, rooms, spaces, enclosures and hoistways, where located in a theatre or a similar place of public entertainment. Stage Machinery Working Group November 06, 2018 2018-11-06 4200.000 ANSI E1.42 - 2016 Entertainment Technology -- Design, Installation, and Use of Orchestra Pit Lifts This standard has been superseded. Stage Machinery Working Group August 05, 2016 2016-08-05 4200.990 ANSI E1.43 - 2016Entertainment Technology - Performer Flying Systems This standard establishes a minimum level of performance parameters for the design, manufacture, use, and maintenance of performer flying systems used in the production of entertainment events. The purpose of this guidance is to achieve the adequate strength, reliability, and safety of these systems to ensure safety of the performer, other production personnel, and audiences under all circumstances associated with performer flying. Rigging February 12, 2016 2016-02-12 4300.000 ANSI E1.44 - 2014 (R2019)Common Show File Exchange Format for Entertainment Industry Automation Control Systems - Stage Machinery This standard addresses common show file requirements for automated stage machinery control systems used in entertainment venues. It establishes a minimum level of design and performance guidelines for the integrated software design of processor based machinery control equipment. The purpose of this guidance is to ensure that users will be able to transfer, modify and customize a 'least common denominator' show file for the data required to tour entertainment productions from one facility to another, even when the facilities' physical conditions, hoist inventories, and placements, and the machinery control consoles and data topology differ. Stage Machinery Working Group May 23, 2019 2019-05-23 4400.000 ANSI E1.44 - 2014Common Show File Exchange Format For Entertainment Industry Automation Control Systems - Stage Machinery This document has been superseded Rigging February 06, 2014 2014-02-06 4400.900 ANSI E1.45 - 2013Unidirectional Transport of IEEE 802 data frames over ANSI E1.11 (DMX512-A) This document has been withdrawn and is no longer an American National Standard. Essential parts of the method are protected by Korean and US patents, and the patent holder has not given assurance that the intellectual property can be licensed under reasonable terms and conditions that are demonstrably free of any unfair discrimination. Control Protocols October 08, 2015 2015-10-08 4500.000 ANSI E1.46 - 2018Standard for the Prevention of Falls from Theatrical Stages and Raised Performance Platforms The users of theatrical stages and raised platforms can suffer debilitating injuries from falls into orchestra pits, open stage lifts, and similar openings in stage floors. Health and safety regulations require action to prevent these falls, but offer little guidance that is suitable for theatrical environments. This document provides that guidance. This revised edition addresses recent changes to 29 CFR 1910 subpart D. Floors July 13, 2018 2018-07-13 4600.000 ANSI E1.46 - 2016Standard for the Prevention of Falls from Theatrical Stages and Raised Performance Platforms This document has been superseded. Floors February 29, 2016 2016-02-29 4600.999 ANSI E1.47-2020Entertainment Technology - Recommended Guidelines for Entertainment Rigging System Inspections This standard is an updated revision of ANSI E1.47 - 2017. It offers guidance on inspecting entertainment rigging systems, which are systems used to lift and support scenery, luminaires, and other equipment overhead in entertainment venues, such as theatres, video/film studios, amphitheatres, and arenas used for live performances or special events. Rigging June 18, 2020 2020-06-18 4700.000 ANSI E1.47 - 2017Entertainment Technology -- Recommended Guidelines for Entertainment Rigging System Inspections This document has been superseded. Rigging April 28, 2017 2017-04-28 4700.999 ANSI E1.48 - 2014 (R2019)A Recommended Luminous Efficiency Function for Stage and Studio Luminaire Photometry ANSI E1.48 specifies an luminous efficiency function V(lambda) that more accurately represents human eye response than many other V(lambda) functions often used when measuring light energy and then expressing it in units that represent the human eye response, such as lux, lumens, and candela. The function recommended in E1.48 results in a more accurate rendering of perceived brightness, particularly with narrow-band sources that have significant energy at the extreme ends of the spectrum, than do other commonly used V(lambda) functions. Photometrics February 01, 2019 2019-02-01 4800.000 ANSI E1.48 - 2014A Recommended Luminous Efficiency Function for Stage and Studio Luminaire Photometry This document has been superseded. Photometrics January 27, 2014 2014-01-27 4800.999 ANSI E1.50-1 -- 2017Requirements for the Structural Support of Temporary LED, Video & Display Systems ANSI E1.50-1 covers the support of temporary installations of large format modular display systems, LED, video and other self-illuminating display structures not otherwise addressed by existing standards. The scope of this standard includes planning and site preparedness, assembly and erection, suspension and safety of components, special access requirements, use, and dismantling of these systems. Rigging August 14, 2017 2017-08-14 5010.000 ANSI E1.51 - 2018The Selection, Installation, and Use of Single-Conductor Portable Power Feeder Cable Systems for Use At 600 Volts Nominal or Less for the Distribution of Electrical Energy in the Television, Film, Live Performance and Event Industries in Canada ANSI E1.51 - 2018, The Selection, Installation, and Use of Single-Conductor Portable Power Feeder Cable Systems for Use At 600 Volts Nominal or Less for the Distribution of Electrical Energy in the Television, Film, Live Performance and Event Industries in Canada, is about what the title says it is about. It gives guidance on how to safely use single-conductor portable power feeder cable, a power distribution technique about which the Canadian Electrical Code is largely silent. Electrical Power November 07, 2018 2018-11-07 5100.000 ANSI E1.53 - 2019Overhead mounting of luminaires, lighting accessories, and other portable devices: specification and practice This standard covers specifications for the primary and secondary mounting devices for portable stage and studio luminaires and accessories, and for similarly fastened special effects machines. The standard offers guidance on how to properly affix these mounting devices. This revision relaxes the labeling requirements and makes it clear that environmental factors (e.g., heat, UV, and salt spray) need to be considered for all mounting devices. Electrical Power June 28, 2019 2019-06-28 5300.000 ANSI E1.53 - 2016Overhead mounting of luminaires, lighting accessories, and other portable devices: specification and practice This document has been superseded. Electrical Power August 04, 2016 2016-08-04 5300.999 ANSI E1.54 - 2021ESTA Standard for Color Communication in Entertainment Lighting This standard specifies the color space to be utilized when communicating color between lightingcontrollers and color-changing luminaires. The method is generic and is neither manufacturer-specific norcolor technology-specific. It facilitates communication of chromaticity only Photometrics January 07, 2021 2021-01-07 5400.000 ANSI E1.54 - 2015PLASA Standard for Color Communication in Entertainment Lighting This document has been superseded. Photometrics May 21, 2015 2015-05-21 5400.999 ANSI E1.55 - 2016 (R2021)Standard for Theatrical Makeup Mirror Lighting ANSI E1.55 - 2016 (R2021) is a standard for the lighting systems used with makeup mirrors and makeup stations in theatres and other performance venues. It describes the topology of the makeup mirror lighting system, the quantity of light, the distribution of light from those sources, apparent source size, brightness, color rendering, and correlated color temperature. This edition of the standard uses the Fidelity Index (Rf) rating per IES TM-30-15, IES Method for Evaluating Light Source Color Rendition, as an acceptable rating to meet the requirements for color rendering. The standard was developed at the request of Actors' Equity Association to help their members. Photometrics November 01, 2021 2021-11-01 5500.000 ANSI E1.55 - 2016Standard for Theatrical Makeup Mirror Lighting This document has been superseded. Photometrics September 16, 2016 2016-09-16 5500.800 ANSI E1.55 - 2015Standard for Theatrical Makeup Mirror Lighting This document has been superseded. Photometrics August 25, 2015 2015-08-25 5500.999 ANSI E1.56-2018Entertainment Technology -- Rigging Support Points This standard applies to stationary rigging points, attached to permanent facility structure, that are intended to be permanent, and provides minimum requirements for the design, fabrication, installation, inspection and documentation of these rigging points for their use to support rigging loads. Rigging November 06, 2018 2018-11-06 5600.000 ANSI E1.57 - 2016 (R2021)Recommendations to prevent falls on or off movable parade floats, movable stages, and similar moving platforms ANSI E1.57 offers recommendations for steps to be taken to prevent falls by anyone (e.g., performers, technicians, politicians) on parade floats, movable stages, and similar moving platforms. Fall protection is needed, but should be provided in a way that preserves the artistic intent of the moving float or platform. This document provides guidance on how to accomplish these two aims. Floors May 05, 2021 2021-05-05 5700.000 ANSI E1.57 - 2016Recommendations to prevent falls on or off movable parade floats, movable stages, and similar moving platforms This document has been superseded. Floors May 06, 2016 2016-05-06 5700.999 ANSI E1.58-2017 (R2022)Electrical Safety Standard for Portable Stage and Studio Equipment Used Outdoors The scope of this Standard is the planning and execution of temporary outdoor portable electrical installations in compliance with the intent of NFPA 70, National Electrical Code, Sections 520.10 and 530.6 which state that "Portable stage and studio lighting equipment and portable power distribution equipment not identified for outdoor use shall be permitted for temporary use outdoors, provided the equipment is supervised by qualified personnel while energized and barriered from the general public." (This quote is from 520.10; 530.6 is similar.) Safety is the primary concern. Conditions that degrade the operational performance or life of the electrical equipment are secondary. Electrical Power August 11, 2022 2022-08-11 5800.000 ANSI E1.58 - 2017Electrical Safety Standard for Portable Stage and Studio Equipment Used Outdoors This document has been superseded Electrical Power October 11, 2017 2017-10-11 5800.000 ANSI E1.59 - 2021Entertainment Technology--Object Transform Protocol (OTP) ANSI E1.59 describes a mechanism to transfer object transform information such as position, orientation and velocity over an IP network using a subset of the [ACN] protocol suite. It covers data format, data protocol, data addressing, and network management. Data transmitted is intended to coordinate visual and audio elements of a production and should not be used for safety critical applications. Control Protocols January 19, 2021 2021-01-19 5900.000 ANSI E1.60 - 2018Guidelines for the Use of Raked Stages in Live Performance Environments This standard provides guidance for the use of raked stages in live performance environments to mitigate the risks for the protection of actors and technicians. Floors September 20, 2018 2018-09-20 6000.000 ANSI E1.62 - 2021Minimum specifications for mass-produced portable platforms, ramps, stairs, and choral risers for live performance events ANSI E1.62 is a product specification covering serially manufactured portable platforms, stair units ramps, and choral risers used for events such as live drama, musicals, fashion shows, and concerts. It also covers railings provided as fall protection accessories for these units. It gives minimum payload and sideways force handling specifications. Custom platforms or complete stage systems are outside its scope. Floors January 19, 2021 2021-01-19 6200.000 ANSI E1.66 - 2020Safety Standard for Followspot Positions Erected for Short-term Use in Entertainment Venues ANSI E1.66 covers the safety requirements for followspot positions in or on structures erected for short-term use, and positions not covered by ANSI E1.28. It is applicable to followspot positions indoors and outdoors. It addresses structural, electrical, and personnel safety requirements associated with non-permanent followspot positions. Followspot Position April 03, 2020 2020-04-03 6600.000 ANSI E1.67 - 2021Entertainment Technology - Design, Inspection, Maintenance, Selection, and Use of Hand and Lever-Operated Chain Hoists in the Entertainment Industry ANSI E1.67 covers the design, inspection, maintenance, selection, and use of serially manufactured hand chain and lever hoists used in the entertainment industry. Rigging May 06, 2021 2021-05-06 6700.000 ANSI E1.69 - 2022Reporting the Dimming Performance of Entertainment Luminaires Using LED Sources The standard describes a way of showing the end-user or equipment specifier the dimming performance of LED luminaires, when the luminaire output level is set by a control signal slowly varying from 100% to 50% and then from 50% to black-out. Photometrics April 25, 2022 2022-04-25 6900.000 Application Guide for ANSI E1.3 - 2001, Lighting Control Systems 0 to 10V Analog Control Specifications This document explains some of the design implications that may not be obvious in the E1.3 standard. It also offers some troubleshooting guidance for users of analog control equipment. This document does not add any requirements to the E1.3 standard, nor does it remove any requirements. All the recommendations in this document are advisory only. Control Protocols 0000-00-00 999901.000 Camera Crane Operator's Handbook The Camera Crane Operator's Handbook is an illustrated booklet that outlines safe practices and good advice for a variety of camera cranes in a variety of situations. The recommendations, coupled with common sense, good judgment, and proper evaluation of each situation, greatly reduce the risk of accidents with camera cranes. Camera Cranes 0000-00-00 999902.000 ESTA_Boilerplate_For_Specifiers.txt ESTA_Boilerplate_For_Specifiers.txt provides cut-and-paste text as a convenience for people writing specifications and wishing to reference in those specifications standards developed in ESTA's Technical Standards Program. Use of this text will reduce the probability of undesired equipment or installation practices being offered in response to a bid or a call for proposals because a standard describing the equipment or installation practice was referenced imprecisely. This document of recommended cut-and-paste text will be revised as new standards are published and older ones are revised or reaffirmed, and as better text specifying the standards is written. TSC 0000-00-00 999903.000 Introduction to Modern Atmospheric Effects, 6th edition The Introduction to Modern Atmospheric Effects, 6th edition is the latest edition of the popular handbook on theatrical fogs. The book gives the entertainment industry a factual presentation on all types of popular atmospheric fog effects. The section on using fog offers tips on putting fog where it will do the most good, lighting it effectively, working with fire alarms, and limiting exposure. This edition includes more detailed information on controlling exposure, including the use of meters. The bibliography also has been updated. Fog & Smoke 0000-00-00 999904.000 Recommended Practice for DMX512: A guide for users and installers, 2nd edition Recommended Practice for DMX512: A guide for users and installers, second edition, by Adam Bennette adds information about ANSI E1.11 (DMX512-A) and ANSI E1.20 (RDM) to the information about USITT's DMX512 that was offered in Bennette's original, popular Recommended Practice for DMX512. This updated edition offers advice intended to help people successfully install and use DMX512-A and RDM equipment. The document is a PLASA/USITT recommended practice, not an ANSI, USITT, or PLASA standard, but it is being offered as an educational service to the industry. 0000-00-00 999905.000 Recommended Practice for Ethernet Cabling Systems in Entertainment Lighting Applications and the Supplement to the Recommended Practice for Ethernet Cabling Systems in Entertainment Lighting Applications The Recommended Practice for Ethernet Cabling Systems in Entertainment Lighting Applications and the Supplement to the Recommended Practice for Ethernet Cabling Systems in Entertainment Lighting Applications are now bundled together to make one packet. The combined packet is being offered at no cost as a service to people with legacy systems. The practices described are not current state of the art and are not recommended for new installations. 66 pages total. Control Protocols 0000-00-00 999906.000 Explanatory Notes to ANSI E1.54 This document offers explanatory notes to ANSI E1.54-2021. It does not add, delete, or modify any requirements in that standard. This document is informational only and is not an AmericanNational Standard. Photometrics 0000-00-00 999907.000 2ff7e9595c
Comments